The premiere iPhone / iPod touch automotive interface

PLX Devices Inc.
1261 Birchwood Drive
Sunnyvale, CA 95089
(408) 745-7591 (P)
(408) 745-7502 (F)

Kiwi Wifi

$149.99

PLX Kiwi Wifi OBD II wireless iPhone/iPod Touch

Kiwi Wifi is a plug and play wireless device measuring only 2.75 x 1.25 x 0.6 inches. Kiwi Wifi comes attached with a 6 ft OBDII cable for easy installation. It also comes included with a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port. It is compatible with 1996 and later vehicles. Connecting to your iPhone / iPod touch is made by 802.11a/b/g connection in adHoc mode. This unit is upgradeable to Kiwi Wifi + iMFD.

 

Technical Specifications
SSID: PLXDevices
IP: 192.168.0.10
Subnet: 255.255.255.0
Port: 35000
Range: 50 ft (Line of sight)
Antenna: Internal
Power Consumption: 0.7 Watts (With Power Switch)
Wifi Standard: 802.11a/b/g
Operating Temperature: -15 to 100 Deg Celsius
Plastic: Automotive Grade
Physical Dimensions: 2.75 x 1.25 x 0.6 inches
Additional Sensor Support: None

 


Kiwi Wifi + iMFD

$249.99

Kiwi Wifi + iMFD combines the best of both worlds into one product. Since the OBDII port does not offer all the sensors you may want to monitor, the added iMFD sensor support allows you to add up to 32 additional dedicated sensor modules from the PLX product line. This includes wideband Air/Fuel Ratio, Exhaust Gas Temperature, Fluid Temperatures and much more. If you're already an owner of the standard Kiwi Wifi, we offer a $100 upgrade option if you later decide you need iMFD sensor support. The Kiwi Wifi + iMFD is 100% backwards compatible with Kiwi Wifi.

The added benefit of Kiwi Wifi + iMFD is that with every additional iMFD sensor module you add, your performance does not degrade. For example, if you're monitoring only 1 sensor from the OBDII port and your refresh rate is 5Hz, by monitoring 2 sensors, your refresh drops to 2.5Hz and so on. By adding 1 or 32 iMFD sensors, your refresh rate is always kept constant at 10Hz. This results in higher performance monitoring for even the most demanding applications.

 

PLX Display Modules are also compatible with the PLX iMFD serial stream. If you require additional dedicated displays be sure to check out our Multi-Gauges and Single Gauges.

 

Technical Specifications
SSID: PLXDevices
IP: 192.168.0.10
Subnet: 255.255.255.0
Port: 35000
Range: 50 ft (Line of sight)
Antenna: Internal
Power Consumption: 0.75 Watts (With Power Switch)
Wifi Standard: 802.11a/b/g
Operating Temperature: -15 to 100 Deg Celsius
Plastic: Automotive Grade
Physical Dimensions: 2.75 x 1.25 x 1.2 inches
Additional Sensor Support: PLX iMFD Sensor Module Support

 

Are you a software developer? Ask about our SDK. Available Now.

Android, Windows Mobile, BlackBerry, WebOS(Palm Pre) Developers Wanted. Please email paul@plxdevices.com


Home   |  Overview   |   Hardware   |   Software   |   Press   |   Support   |   Community   |   About   |   Contact
Copyright 2003-2010 PLX Devices Inc.